http://www.saltysupply.com/Kessil-LED-Lighting-s/14931.htm
Kessil A150W 10000K Special Blend LED Aquarium Light - Sky Blue
Kessil A150W 15000K Special Blend LED Aquarium Light - Ocean Blue
Kessil A150W Actinic Special Blend LED Aquarium Light - Deep Ocean Blue
With its innovative design and high quality, radiant light, Kessil presents the A150W LED aquarium light. Using Dense Matrix LED technology to emulate a point-like source, A150W provides the shimmery effects of a metal halide without its excess power consumption and heat. Bring out the beauty of blue water and vivid colors of coral with the specially created spectrums of A150W.
Actinic Special Blend
The DEEP OCEAN BLUE model's special blend of wavelengths emulates an actinic light for a deep blue color that brings water to life.
15000K* Special Blend
This unique mix of wavelengths closely resembles a 15000 K light, creating a visually stunning effect for water and coral in your aquarium.
10000K* Special Blend
The SKY BLUE model's distinctive spectrum emits light similar to a 10000 K light, emitting a natural looking light while providing coral with optimized wavelengths.
PRODUCT SPECIFICATIONS
Illuminator Power Consumption 32 Watt Maximum Input Voltage 24 VDC ± 5%
Listed Power Supply Input 100-240 VAC 50-60 Hz Output 24 VDC, Maxiumum 2.1A, 50 Watts
BEST PRACTICES FOR INSTALLATION AND MAINTENANCE
- To hang the LED for aquarium use from a wood, acoustic or similarly textured ceiling, mount 2 metal hooks and hang the light by its brackets. The metal hooks should have diameters of at least 2.5mm and thread numbers of at least 6.
- For sufficient airflow, the intake and venting holes should be at least 12 inches from surrounding obstructions.
- Kessil recommends A150W lights to be placed 1 to 2 feet above the aquarium being illuminated.
- Plug the light’s power supply into an outlet with the proper specifications.
- Do not use the A150W lights outdoors. They are intended for indoor use only.
- Keep the air vents and fan clear of dust. To clean the fan, insert the tip of a CO2 (or similar) dust blower into one of the vent slots and spray.
- Keep the diffuser (lens) clean. If the diffuser becomes contaminated with water, dust or other particles, clean it with isopropyl alcohol. Wet a cotton swab or a napkin in isopropyl alcohol and gently wipe the surface of the diffuser and let it dry.
